What Is The Gun Cleaning Mop Used For?

Gun cleaning mop refers to a thick cotton mop, which should be the same diameter as the barrel of the gun. Gun owners need it to clean their guns, so anyone who owns a gun knows a gun cleaning mop. The gun cleaning mop cleans the barrel of the gun by pushing forward and backward. Gun cleaning mops work well because they can soak the holes and saturate them easily.

Owning a gun means you should take good care of your gun. In the process of caring for the firearm, you must use the firearm cleaning mop to clean the firearm so that you can easily use your firearm for shooting. If the gun looks dirty, it means that it lacks attention, which means that its performance will be poor.

In addition to regular cleaning, lubrication is also very important. If you lack sufficient lubrication, it means that the function of your gun will be affected. It may not function correctly, even if your aim is perfect. It may be dangerous for anyone around and also for the gun owner. For safety, you must use a gun cleaning mop to clean the barrel and lubricate the gun.

Here are the steps to use a gun cleaning mop：

1. Spray solvent

In the first step, you need to spray some cleaning agent or solvent into the barrel of the gun. You can use the gun cleaning mop featuring phosphor bronze as a cleaning rod. The bronze brush comes attached to the rod. Using it many times is helpful as it helps in loosening the shot and powder residue.

2. Remove the brush

Pushing the mop should be done with care so that it reaches each gun chamber. Once the gun cleaning mop is inside, give a twist so that it can enter inside. The pushing is required as it comes as a tight fit.

3. Expect squeaking and resistance

As you are using the gun cleaning mop, there may be some squeaking, and also, you may experience resistance as you try pushing them with the rod through the bores. While cleaning, the mops may get soiled heavily, and if so, you must dispose of them off.

However, if you have to clear some light residue, you may push into each chamber with another mop and a rod through. However, if you own a multi-choke gun, ensure the choke tubes are fitted before gun cleaning.

4. Final step

Finally, you should spray inside the bores some gun oil and run them through it using the same mops. It will coat the bores with clean oil in a thin film and safeguard them in the storage place.

After cleaning your gun with the gun cleaning mop, you can wash it and dry it. Then keep the mops safely so that you can use them the next time for gun cleaning.