How To Use A Bore Snake Kit?

The bore snake is a soft fabric cord with a tapered thin end to which a weight is attached to help the cord initially pass through the breech end of the barrel to clean the firearm. But how exactly should bore snake be used?

Step 1: Empty and open the barrel

Make sure your gun is clear of bullets so you can keep yourself safe while cleaning.

Step 2: Spray the cleaner

Take some cleaner and spray the foam cleaner down the gun barrel for about 3-5 seconds. After a few seconds, go to step 3.

Step 3: Start cleaning with the bore snake

When cleaning with a bore snake, start by inserting the front or brass end of the cord into your barrel and pulling it towards the end of the barrel. Once the nose of the bore snake reaches the end of the barrel, pull firmly, making sure the mop and brass brush go into the barrel without scratching the outer surface of the gun. Usually, one pass is enough. However, if you want to clean more thoroughly, you can repeat the above steps one more time.

Why use a bore snake?

Bore snakes are a quick and effective way to clean the chamber of a gun. However, they are not a replacement for deep cleaning guns. You can use the bore snake kit for simple cleaning after every hunt or shoot. However, you should still properly clean your firearm with a professional gun cleaning kit every 2 to 3 weeks. Especially when your firearm has been used many times and the cleanliness is not high, you need to use a professional firearm cleaning kit for cleaning. It is important to use a good gun cleaning kit for a deep clean and a full breakdown to clean and refuel the gun. So, after a while, remember to thoroughly clean your firearm with a gun cleaning kit.