DIY A Gun Cleaning Kit

Regular cleaning of firearms is essential for firearm owners. If you want to thoroughly clean your guns, you need a gun cleaning kit, and today we are going to show you how to DIY a gun cleaning kit yourself.

1. A Case

To have a gun cleaning kit, the important thing is that you should have a case. You’ll need some kind of box or bag to store everything you need to clean your guns in.

2. Cleaning solvent

Gun cleaning solvents are used in the initial stages of gun cleaning. Solvents that remove copper work best on firearms because they can easily remove powder deposits.

3. Gun Oil or Lubricant

A thin coating can help you prevent parts of your gun from rusting. On the other hand, a thick coating can attract debris. Therefore, after cleaning your guns, always apply a thin coat when you’re already putting lubricants on your gun.

4. Patches

Cotton patches are the preferred choice. You can choose round or rectangular patches for gun cleaning.

5. Bore Brush

You must need one or several bore brushes in your gun cleaning kit. Plastic or brass brushes are best if you own a rifle.

6. Cleaning Rod

The gun cleaning rod is also something you must have. It should not be too big, and not too small. It should fit down your bore just right. If you are handy with a hacksaw, you can trim down the rod, but remember to trim it from the handle side so you don’t have to re-thread anything.

7. Nylon Gun Cleaning Brush

The nylon gun cleaning brushes can help you remove unwanted dust and dirt from tight spaces within your gun. They are also important.

8. Cotton Swabs

When you choose swabs, remember to choose cotton over synthetic, as they are better at holding solvents.

The above are the essential tools for you if you are going DIY a gun cleaning kit. Before you start cleaning your guns, we have to remind you to always unload your gun and test for safety first to avoid any disaster from happening.